NEWS
Get the latest company information
The reason why the compression spring machine can not be reset to zero
- Categories:Industrial News
- Author:
- Origin:
- Time of issue:2020-04-03 18:48
- Views:0
(Summary description)
The reason why the compression spring machine can not be reset to zero
(Summary description)
- Categories:Industrial News
- Author:
- Origin:
- Time of issue:2020-04-03 18:48
- Views:0
Information
At present, the computerized spring compression machine equipment on the market will retain the beating control signal, mainly for timely and effective control of the beating and shutdown operations of the host during the production process, thereby reducing unnecessary waste of product materials. Hangzhou Sanli Electric Furnace reminds that during the normal production process, it is necessary to check whether the connection of the external signal control line is normal, and try to avoid falling or accidentally touching other parts, otherwise the computer spring machine will not work properly
If the operation signal is improperly operated, it will cause the compression spring machine to fail to operate normally. At the same time, the system interface of the host will display a warning message "The system has not been reset!". According to the prompt message, in the next normal zeroing operation, the system interface cannot perform normal zeroing operation, and "X zeroing failed, please confirm whether the origin signal is normal!" A warning message is displayed. At this time, I believe that the first reaction of many users and friends will be a problem with the manufacturer's computer spring machine system, and the responsibility for the problem will be blamed on the spring machine manufacturer. This is not the case.
So, how should we solve the above situation? We can investigate the problems one by one to find the source of the problem and solve it. First, the warning message "The system is not zeroed!" appears on the system interface of the spring compression machine. Check whether the X-axis origin signal is normal, and use the handwheel to operate the X-axis forward and reverse to exclude whether the X-axis origin signal is normal. Secondly, according to the warning message "X returns to zero, please confirm whether the origin signal is normal!", check the external information control lines one by one, such as falling off or accidentally touching other components, so as to eliminate whether each external signal control line is normal. In summary, the above warning message, such as "The system has not been reset to zero", was caused by a misoperation of the computer spring machine running signal and caused contact with other components.
In short, the existence of human operation factors will lead to various uncertainties in the production process, and the corresponding erroneous operation is the main reason for the short-term failure of the computer spring machine. Therefore, correct operation is indispensable for every user of the spring compression machine, and it is also indispensable to check the connection of each component in time.
Scan the QR code to read on your phone
Quick navigation
Contact Us
Manager Zhao 15957199037
Manager Zhang 13735477871
Manager Bao 13868093636
Manager Zhai 18910062579(Overseas Marketing)
Phone: 0571-64641281
Fax: 0571-64641282
Address: No.9 Jiu Bao Road, Jiu Xian Street, TongLu County,HangZhou, Zhejiang
International Agent
Copyright © 2024 Hangzhou Sanli Furnace Co.，Ltd all rights reserved 浙ICP备20002980号-1 Power by www.300.cn